In the previous lab we performed FIR filter designing using windowing method. This lab was about designing a filter having linear or nonlinear filter. Required input data given was cutoff frequency and order of the filter. Here also to find h (n) we used to have (w) from that we replaced w by (2πk) /N that is sampling of frequency response, where N is range of sampling.
Therefore Hd (w) is converted into Hd (k) having symmetrical sampled values about N/2 sampling point. And then by taking IDFT of Hd (k) we found required h (n) i.e. characteristic of the filter.
Therefore Hd (w) is converted into Hd (k) having symmetrical sampled values about N/2 sampling point. And then by taking IDFT of Hd (k) we found required h (n) i.e. characteristic of the filter.
Which is the method that is preferred amongst the two and why?
ReplyDelete